Outdoor Compact RFID Reader
XPass D2 is an outdoor compact RFID reader based on Suprema’s state-of-the-art RFID technology and multi-hardware platform, optimized for centralized access control systems such as Suprema’s CoreStation.

Using multi-form factor technology, mullion-type, gangbox-type and gangbox keypad-type are all supported. With dual-frequency (125kHz / 13.56MHz) RFID technology, XPass D2 also supports mobile cards using NFC and BLE, the latest mobile communication technologies. Packed in a rugged IP65/IP67 rated dust & waterproof performance as well as IK08 rated vandal-proof structure, suitable for tough environments and outdoor installations.

Dual Frequency, Multi-Smartcard Reader
Featuring dual-frequency RFID card technology, XPass D2 supports both LF(125KHz) and HF(13.56MHz) RFID including all RFID card standards. On top of fingerprint credential, XPass D2 supports most types of RFID card standards with a single device including EM, MIFARE, MIFARE Plus, DESFire/EV1, FeliCa, NFC and BLE.

Communicates with Smartphones
With BioStar 2 Mobile card, as a credential,  your smartphone is a key to access.

Standardized Communications
Open Supervised Device Protocol (OSDP) Combined with Suprema’s intelligent biometric controller, the CoreStation, XPass D2 completes biometrics-driven access control system with enhanced simplicity and level of security of centralized system topology.

125kHz card compatibility EM
13.56MHz card compatibility MIFARE, MIFARE Plus, DESFire/EV1, FeliCa
Mobile Card NFC, BLE
RF read range MIFARE/DESFire/EM : 50 mm, FeliCa: 30 mm
RF read range will vary depending on the installation environment.
Ingress Protection IP67
Impact Protection IK08
Installation type Mullion Gangbox
Keypad Support (3×4)
RS-485 1ch (OSDP compatible)
Wiegand 1ch output
TTL 1ch damper print, 3ch LED,
Buzzer Control
Sound Multi-tone buzzer
Operating Temperature -35℃ ~ 65℃
Storage temperature -40℃ ~ 70℃
Operating Humidity 0% ~ 95%, non-condensing
Storage Humidity 0% ~ 95%, non-condensing
Dimensions (WxHxD, mm) 48 x 144.7 x 27 80 x 130 x 25 80 x 130 x 25
Certificates CE, FCC, KC, RoHS, REACH, WEEE, SIG

 

Hardware CPU 80 MHz
Memory 256 KB Flash + 64 KB RAM
LED Multi-color
Sound Multi-tone Buzzer
Operating temperature -35°C ~ 65°C
Storage temperature -40°C ~ 70°C
Operating humidity 0% ~ 95%, non-condensing
Storage humidity 0% ~ 95%, non-condensing
Dimension (W x H x D) 48 mm x 144.7 mm x 27 mm
Weight Device: 117g
Bracket: 30g (Including washer and bolt)
Interface RS-485 1ch
Wiegand 1ch
LED 2ch
Beep 1ch
Tamper Supported
Electrical Power Voltage: DC 12 V, Current: Max. 400 mA
* Use 12 VDC, 1.5A power supply.
Switch input VIH Min. 3 V
Max. 5 V
Switch input VIL Max. 1 V
Switch Pull-up resistance 4.7 kΩ (The input ports are pulled up with 4.7 kΩ.)
Wiegand output VOH More than 4.8 V
Wiegand output VOL Less than 0.2 V
Wiegand output Pull-up resistance Internally pulled up with 1 kΩ

Comments are closed.

Translate »